Home / Past Issue / Abstract
July 2023
The Influence of Pulp Capping Procedures on the Long-Term Prognosis and Survival of Teeth
Waleed Alshargawi, Shoug Alaamer, Entesar Alharabi, Sarah Alzaid, Saeed Alghamdi, Bandary Almarshedy, Abdullah Alhammad, Norah ALharbi, Salman Alshammari, Maha Aldahami, Aljaze Alhaif
DOI: http://dx.doi.org/10.52533/JOHS.2023.30708
Keywords: pulp capping, biomaterial selection, treatment outcomes, mineral trioxide aggregate, calcium hydroxide
Pulp capping is a dental procedure to treat deep caries and preserve the vitality of affected teeth. It involves placing a biocompatible material directly on the exposed pulp (direct pulp capping) or using a medicated liner to protect the pulp (indirect pulp capping). The choice of biomaterials, such as calcium hydroxide or mineral trioxide aggregate (MTA), significantly impacts the success of pulp capping. Patient-related factors, including age, oral hygiene, and systemic health conditions, influence treatment outcomes. Younger patients generally have better results due to higher pulp vitality and regenerative capacity. Maintaining good oral hygiene and managing systemic health conditions are crucial for long-term success. Complications and treatment failure can occur in pulp capping, depending on factors like cavity size, infection, and initial pulp condition. Early detection and intervention are important to prevent further issues. Success in pulp capping is assessed based on factors like continuous root development, preserved pulp vitality, minimal inflammation, and formation of reparative dentin. Success rates may decrease over time, and further research is needed to understand why. Understanding procedural techniques, biomaterial selection, patient-related factors, and complications are vital for informed decision-making, optimizing outcomes, and increasing the longevity of pulp-capped teeth.
Introduction
Pulp capping is a dental therapeutic modality that aims to uphold the long-term prognosis and survival of teeth affected by deep caries (1). With the potential to preserve the vitality of the dental pulp and promote the formation of reparative dentin, pulp capping offers an attractive alternative to more invasive treatments, such as root canal therapy or tooth extraction (2). However, achieving optimal outcomes in pulp capping requires a comprehensive understanding of the intricate dynamics and influences that govern treatment success. Pulp capping involves multifaceted aspects, including procedural techniques, biomaterial selection, patient-related factors, and the risk of complications, to shed light on the intricate relationship between this therapeutic approach and the ultimate longevity of treated teeth (3).
Pulp capping techniques can be broadly categorized into two approaches: direct pulp capping and indirect pulp capping (4). In direct pulp capping, a biocompatible material, such as calcium hydroxide or mineral trioxide aggregate (MTA), is placed directly over the exposed pulp to facilitate healing and stimulate the formation of dentin (5). Conversely, indirect pulp capping involves the application of a medicated liner to protect the pulp from further irritation and promote the formation of a dentin bridge (6). Understanding the nuances and comparative effectiveness of these techniques is vital in determining the most appropriate approach to maximize the long-term prognosis and survival of treated teeth.
The selection of biomaterials used in pulp capping procedures significantly impacts treatment outcomes (5). Calcium hydroxide has long been the material of choice due to its antibacterial properties and ability to stimulate reparative dentinogenesis (7). However, the advent of mineral trioxide aggregate (MTA) has revolutionized pulp capping, offering improved biocompatibility and dentinogenic potential (8). The success of pulp capping relies on the ability of these materials to establish a favorable interface between the pulp tissue and the restorative material, promoting pulp healing and preventing bacterial microleakage (9). Exploring the characteristics and comparative effectiveness of various biomaterials in pulp capping procedures is essential in guiding evidence-based clinical decision-making.
Patient-related factors play a critical role in determining the long-term prognosis of pulp-capped teeth (10). Age has been identified as a significant predictor of treatment outcomes, with younger patients generally exhibiting higher pulp vitality and regenerative capacity (11). Moreover, meticulous oral hygiene practices and regular dental visits are pivotal in maintaining the overall health of teeth and can influence the success of pulp capping procedures. Factors such as systemic health conditions, immune status, and genetic predisposition may also influence treatment outcomes (12). Investigating the interplay between patient-related factors and the success of pulp capping techniques is crucial in tailoring treatment approaches and optimizing clinical outcomes.
While pulp capping aims to mitigate the need for more invasive interventions, it is essential to evaluate the risk of complications or treatment failure associated with these techniques. Factors such as the size and location of the cavity, the presence of pulp inflammation or infection, and the development of periapical lesions can significantly impact the long-term prognosis (13). Recognizing the incidence and nature of such complications is vital for early detection, timely intervention, and appropriate patient management.
Methodology
This study is based on a comprehensive literature search conducted on June 4, 2023, in the Medline and Cochrane databases, utilizing the medical topic headings (MeSH) and a combination of all available related terms, according to the database. To prevent missing any possible research, a manual search for publications was conducted through Google Scholar, using the reference lists of the previously listed papers as a starting point. We looked for valuable information in papers that discussed the influence of pulp capping procedures on the long-term prognosis and survival of teeth. There were no restrictions on date, language, participant age, or type of publication.
Discussion
In Barthel et al.’s study in which pulp capping was performed by dental students, the 10-year success rate was 13% (14). The success of pulp capping procedures relies on numerous interrelated factors that contribute to the long-term prognosis and survival of treated teeth (6). An in-depth understanding of the specific treatment factors influencing the outcomes of pulp capping, encompassing procedural techniques, biomaterial selection, patient-related factors, and the risk of complications enables the dentist to make evidence-based decisions, optimize treatment outcomes, and enhance the longevity of pulp-capped teeth (2). The key parameters affecting treatment outcomes of pulp therapy are a correct evaluation of the pulp status before therapy, elimination of decay, avoidance of leakage, and the adoption of an aseptic approach. The long-term outcome of pulp capping is typically correlated with the degree of crown damage and the capacity to restore a tooth (15). The sort of pulp capping biomaterial used (16), the technique used (17), the depth of the carious pulpal exposure (18), the period of examination (14), the final site and integrity of the dentin bridge, the existence of bacteria with infection thereafter, and the inflammatory situation of the pulpal tissue all play a part in assessing the prognosis (15). Also, failure of the pulp capping must be distinguished from the breakdown of the underlying restoration (19). There are certain restrictions on how the long-term effectiveness of pulp capping may be assessed, such as the difficulties of routinely recalling patients and the challenge of assessing histological success (13). Based on the patient's medical history, clinical and radiographic results, the possibility of long-term success, and the potential for tooth restoration, a carefully considered decision should be made regarding the optimal course of therapy (19).
The two main procedural techniques in pulp capping are direct and indirect pulp capping. Direct pulp capping involves placing a biocompatible material, such as calcium hydroxide or mineral trioxide aggregate (MTA), directly over the exposed pulp (20). Several factors influence the success of direct pulp capping, including the management of pulpal bleeding, the quality of pulp tissue debridement, and the sealing efficacy of the restorative material. Achieving an effective seal is crucial to prevent bacterial microleakage and subsequent pulp inflammation or infection. Two factors have been stressed as being essential to the effectiveness of calcium hydroxide direct pulp capping (21). Pulp-capping should only be done on teeth that are asymptomatic, and a well-sealed restoration has to be put in place as soon as possible after pulp capping. Indirect pulp capping is employed when the pulp is not exposed but is at risk of pulpal inflammation or infection due to deep caries proximity (22). The use of a medicated liner, such as calcium hydroxide or resin-modified glass-ionomer cement, helps create a protective barrier and promotes the formation of a dentin bridge (23). Factors such as the selection and thickness of the liner, the timing of liner placement, and the evaluation interval impact the success of indirect pulp capping.
Biomaterial selection plays a vital role in determining treatment prognosis in these procedures. Biomaterials used in pulp capping should have a number of qualities, such as the capacity to get rid of pathogens, establish a good seal, stimulate mineralization, and promote normal root development (24). For many years, calcium hydroxide has been regarded as the "gold standard" for direct pulp capping. In a review of 19 clinical studies with more than 2,400 patients, the success rates of calcium hydroxide pulp-capping ranged from roughly 60% to almost 100% when performed by a skilled clinician (25). Calcium hydroxide has been a longstanding material of choice in pulp capping due to its antibacterial properties and ability to stimulate dentinogenesis (9). The alkaline pH of calcium hydroxide facilitates the neutralization of bacterial acids and promotes the formation of a hard tissue bridge (26). However, limitations such as its low mechanical strength and potential for degradation over time have led to the exploration of alternative biomaterials. MTA has gained popularity in recent years due to its superior biocompatibility, sealing ability, and potential to induce dentin formation (27). MTA promotes the differentiation of dental pulp stem cells into odontoblast-like cells, leading to the deposition of a dentin bridge (28). MTA's advantageous properties make it an attractive choice for pulp capping procedures, but considerations such as handling characteristics and cost must be taken into account. Emerging materials such as biodentine and resin-based materials offer additional alternatives for pulp capping. Biodentine, a bioactive calcium silicate-based material, exhibits properties similar to MTA and has shown promising results in pulp capping procedures (29). Resin-based materials, including adhesive systems and composite resins, offer advantages in terms of bonding and aesthetics (30). Animal pulp capping experiments comparing MTA to calcium hydroxide show that MTA generally results in pulp healing of higher grade (31). The majority of human trials demonstrated similar calcium hydroxide and MTA pulp cap results. In a study using 11 pairs of third molars and direct pulp capping, it was feasible to see that MTA groups displayed greater pulp healing than calcium hydroxide groups. These teeth's pulps were mechanically exposed, covered in ZOE, covered in MTA or calcium hydroxide, then restored with amalgam (32). Following tooth extraction, histological analysis at 1-week, 2-, 3-, 4-, and 6-month intervals showed that the MTA-treated teeth had less pulp hyperemia, less inflammation and necrosis, and more predictable and consistent dentinal bridge construction (32). Other researchers have reported getting similar results (33). The five-year success rate for MTA was 78-98% (34, 35) and with calcium hydroxide in permanent teeth pulp capping has been found to range between 59-69% (8, 35). MTA seems to be more successful than calcium hydroxide at preserving long-term pulp vitality.
Patient-related factors also play a role in long-term success of vital pulp therapy. Age has a significant impact on the long-term prognosis of pulp-capped teeth (36). Younger patients generally exhibit higher pulp vitality and regenerative capacity, contributing to more favorable treatment outcomes (37). Age-related factors such as dentin thickness, immune response, and reparative capabilities influence the success of pulp capping procedures (38). Meticulous oral hygiene practices, including regular brushing, flossing, and professional cleanings, play a crucial role in maintaining the overall health of teeth. Good oral hygiene reduces the risk of recurrent decay, pulp inflammation, and secondary infection, thereby enhancing the long-term prognosis of pulp-capped teeth. Systemic health conditions, such as diabetes or immunocompromised states, can impact the success of pulp capping procedures (12). Certain medications, such as bisphosphonates, may affect bone metabolism and healing, potentially influencing treatment outcomes. Careful consideration of patient medical history and medication usage is essential for treatment planning.
Despite appropriate treatment, the risk of pulp inflammation or infection remains a concern. Factors such as the size and location of the cavity, the presence of microorganisms, and the pulp's initial condition can influence the occurrence of complications (13). Timely detection and intervention are crucial to prevent the spread of infection and maintain the long-term viability of the tooth. Periapical lesions, such as periapical granulomas or cysts, can develop as a consequence of untreated or persistent pulpal inflammation (6). The presence of periapical lesions poses a risk to the long-term prognosis of pulp-capped teeth and may necessitate additional endodontic intervention. The two main clinical and radiological criteria listed below are, in accordance with various authors (15, 39 {Bergenholtz, 2004 #3330), the signs of successful treatment: Continuous root development and apexogenesis of teeth, preservation of pulp vitality, minimal pulp inflammatory responses, development of a continuous layer of reparative dentin, nonexistence of postoperative clinical signs or symptoms of thermal or periapical and/or both sensitivity, such as pain or swelling, lack of radiographic evidence of internal or external root resorption, periapical and/or inter-radicular radiolucency, uneven calcification, or other pathologic alterations (39, 40). Numerous studies have shown that success rates decline over time (41). Further research is required because there isn't a clear explanation for this fact at this time. Infection brought on by either lingering bacteria or new microorganisms entering the restored margins results in unfavorable effects. Therefore, using a rubber dam and maintaining aseptic conditions during therapy are of great importance in addition to the quick deployment of a bacteria-tight restoration. Practitioners are less certain about the effectiveness of pulp capping, despite clinical research suggesting that the its success rates in caries-exposed immature permanent teeth may be comparable to the success rate of root canal treatment (42). Following pulp capping, several problems could arise, thus patients should be closely monitored. According to studies, there is a greater than 95% chance that a tooth with a successful treatment outcome five years after VPT will continue to be functional. As a result, it may be too soon to perform an adequate postoperative follow-up evaluation after 1-2 years, as is frequently advised (41).
Conclusion
Pulp capping treatment offers a conservative approach to preserve the vitality and function of teeth affected by deep caries. The long-term prognosis and survival of treated teeth are influenced by a multitude of factors, including procedural techniques, biomaterial selection, patient-related variables, and the risk of complications. An understanding of these specific factors is crucial for optimizing treatment outcomes and enhancing the longevity of pulp-capped teeth. By considering these aspects and conducting further research, dental professionals can refine treatment protocols, tailor approaches to individual patients, and provide predictable and successful outcomes in pulp capping procedures.
Disclosure
Conflict of interest
There is no conflict of interest
Funding
No funding
Ethical consideration
Non applicable
Data availability
Data that support the findings of this study are embedded within the manuscript.
Author contribution
All authors contributed to conceptualizing, data drafting, collection, and final writing of the manuscript.